After you experience Water Damage in Burbank from a leaky pipe, rainstorm or flood, you definitely need to get things back to normal as soon as you can, most likely you will need Water Damage in Burbank restoration services.
If you’re dealing with anything other than a huge incursion, you understandably may be contemplating treating the cleanup and drying yourself to save time or money. The problem is that cleaning up and recovering from Water Damage in Burbank is not always as simple as it looks like, professional Water Damage in Burbank restoration may even help you to save money and effort. This post highlights 3 key things you need to be informed of when repairing Water Damage in Burbank from a minor clean water (or Category 1) incursion.
1) Know What You’re Dealing With
If you read our recent post on comprehending the risks of Water Damage in Burbank, then you know that Water Damage in Burbank can be caused by three separate types of water, including:
Clean water (Category I)
Gray water (Category 2)
Blackwater (Category 3)
It’s essential to figure out the differences since Category 2 and Category 3 water present health risks to your family or employees and clients and need to be handled differently. The most probable sources of fresh water could be water out of a pipe, water heater, steam lines or even rainwater. The basic rule of thumb is that it ought to look and smell like tap water.
Recovering from Category 2 or Category 3 Water Damage in Burbank or heavy flooding implies additional concerns that we won’t go into in this post, but you may read about in our Quick Guide to Water Damage in Burbank.
2) Be Sure You Investigate All of the Damage
The rough thing about recovering from Water Damage in Burbank by something such as a broken pipe or rainwater incursion is that you can typically only observe a small portion of the true damage. The majority of the moisture is often hidden in walls, and it is essential to identify and dry all of the affected regions to stop mould.
The methods for handling damage to walls when it comes to Water Damage in Burbank restoration are based on the type of substances and also what’s behind those substances. Drywall may often be salvaged once you react quickly to damage.
You’ll also need to pull and assess your base molding and flooring materials. If you the floors are carpet, you might be able to pull back the moist area and dry it (along with the flooring materials using a fan).
3) Establish Adequate Airflow and Keep the Windows Closed When Drying
As soon as you discover moisture, your first instinct may be to open windows to help with the drying process, but it might not be your best move. For example, if your building is mechanically ventilated, the systems need constant pressure levels to operate properly. You also need to prevent extra coolness or heat and humidity, or you might end up complicating the drying procedure.
You’ll typically need one air mover for each 15 — 25 square feet of floor unless the moisture density and load is particularly high, then you may need more. To avoid mold, make certain all of the layers and materials are dry before putting everything back together.
The Big Dry Out
If you have experienced Water Damage in Burbank, ideally, you’re dealing with fresh water and a small area. Regardless of which type of Water Damage in Burbank you’re addressing, if you would like more information about Water Damage in Burbank restoration, this manual is a good starting point. And if you have any additional questions or need assistance from professionals of Water Damage in Burbank restoration, don’t hesitate to call us.
What does Water Damage in Burbank look like?
Why is Water Damage in Burbank bad?
