Free Inspection 24/7

How can you dry Out Water Damaged Walls in Buena Park?

When you come upon water damage in Buena Park from a leaky pipe, rainstorm or flooding, you naturally need to have things back to normal as soon as you can, most likely you will need water damage restoration solutions.

If you’re dealing with anything aside from a big incursion, you understandably may be considering treating the cleanup and drying yourself to save money or time. The challange is that cleaning up and recovering from water damage is not always as simple as it appears, professional water damage restoration may even help you to save money and effort. This post highlights 3 key things you need to be informed of when repairing water damage from a small clean water (or Category 1) incursion.

1) Know What You’re Dealing With
If you read our recent article on comprehending the risks of water damage, then you know that water damage in Buena Park can be caused by three different kinds of water, including:

Clean water (Category I)
Gray water (Category 2)
Blackwater (Category 3)

It’s essential to figure out the differences since Category 2 and Category 3 water present health risks to your employees and customers and need to be handled otherwise. The most likely sources of fresh water would be water out of a pipe, water heater, steam lines or perhaps rainwater. The simple rule of thumb is that it should look and smell like tap water.
Recovering from Category 2 or Category 3 water damage or significant flood implies additional challenges that we won’t enter into in this article, but you can read about in our Quick Guide to Water Damage.

2) Make Sure That You Investigate All of the Damage
The rough thing about recovering from water damage in Buena Park from some thing such as a broken pipe or rainwater incursion is that you can typically only observe a small portion of the actual harm. Nearly all the moisture is frequently concealed in walls, and it is essential to identify and dry all of the affected regions to stop mold.

The methods for handling damage to walls in regards to water damage restoration depend on the kind of materials and also what’s behind those materials. Drywall can often be salvaged once you respond quickly to harm.
You’ll also need to pull and check your base molding and flooring materials. If you the floors are carpet, you might have the ability to pull back the wet area and wash it (and the flooring materials using a fan).

3) Establish Proper Airflow and Maintain the Windows Closed When Drying
Once you find moisture, your first instinct is to open windows to assist with the drying process, but it might not be your very best move. For example, if your building is mechanically ventilated, the systems need constant pressure levels to operate properly. You also need to avoid excess coolness or heat and humidity, or you might end up complicating the drying process.
You’ll typically need 1 air-conditioning for every 15 — 25 square feet of flooring unless the moisture load and density are particularly high, you might need more. To prevent mold, make certain all of the layers and materials are dry before putting everything back together.

The Large Dry Out
If you’ve experienced water damage, hopefully, you’re dealing with fresh water and a small location. Regardless of what kind of water damage you’re addressing, if you want more info about water damage restoration, this guide is an excellent starting point. And if you have any additional questions or want assistance from professionals of water damage restoration, do not hesitate to call us.

Does water damage get worse over the years?


Share this post